iStartSmart AIO Installation Manual
3.3.
Assemble the Desk Base
6. Expand the desk to the height specified in the
work order.
7. If no height is listed, use the middle set of
holes on the desk, with top holes on the base
for the standard height of 20 3/8" for Pre-K
configurations.
Pre-K
8. Line up the holes, and then insert the 4 screws
Height
(removed earlier) on the inside.
Pre-K
Height
1. Using the XAUS 4mm Hex wrench (one is
provided), remove the (2) central 1"
XBTUHexdrive screws that hold the printer
shelf in its shipping position. Set the screws
aside for use in step 4.
Checklist item 1.
Confirm either a
specified or standard
height.
Photograph this step to
document
configuration.
12