Table of Contents
Advertisement
iStartSmart AIO Installation Manual
(2) XARS Locking Casters and (2)
XFOY Non-Locking Casters
(5) XBTU 1" Hexdrive
Screws
(2) XBHD 1-
th
9/16
Decorative
Screws
3. Retrieve the hardware kit that was in the base
box. You should have (2) XARS Locking Casters
(2) XFOY Non-Locking Casters, (5) 1"
XBTUHexdrive screws, and (2)XBHD 1 9/16"
Decorative Screws. (1) XAUS 4mm hex wrench
is also provided.
4. On the base, temporarily remove the 4 inner
screws to allow the desk height to be adjusted.
5. For adjustments, there are 3 top holes, and 2
base holes. This allows 5 different heights. If a
desk height is specified, select the hole
combination that will be needed.
11
Advertisement
Table of Contents
