Table of Contents
Advertisement
iStartSmart AIO Installation Manual
1. Retrieve the AIO computer and hardware kit.
Insert the long mounting screws into the
base of the AIO. *The mounting screws may
be difficult to start due to extra powder coat
near the mounting holes. Use of both wing-
nuts will allow you to apply more pressure to
insert the rod into the base. Once you have
tightened the first screw you can then move
on to secure the second screw using the
same method.
2. Note the location of the two holes in the
desk top. These will be for the screws in the
AIO base.
TIP
The front of the display
faces away from the
printer shelf.
17
Advertisement
Table of Contents
