Note: (1) RIO-3309C/RIO-3309L only has one IDE channel, thus the IDE CD-ROM
is connected to "USB to IDE" daughter board.
(2) Please use Windows 2000 SP4 for USB driver installation. If neither CPU
board nor RIO have PS/2 port, please use Com port mouse with USB
keyboard to copy USB 2.0 driver to floppy or HDD for USB 2.0 driver
installation.
2.3.6 Replacing the Hot-swap Fan and Air Filter
The MIC-3041L provides one hot-swap fans at the left hand sides of the MIC-3041L.
Please refer to Figure 2-5. It can be removed without turning off the system power
or interrupting system operation.
Follow these steps to replace a fan:
1. Unfasten the fan's holder.
2. Slide the fan's holder out.
3. Replace the old fan with a new one.
4. Slide the fan's holder in.
5. Fasten the new fan's holder.
The air filter may become dirty after a period of time. Follow these steps to replace
a filter:
1. Remove the top plate.
2. Replace the dirty filter with a clean one.
3. Reattach the top plate.
Repeat steps 1 to 3 to replace other filters.
Figure 2-5: Hot swappable fan maintenance
MIC-3041L User Manual --- Page 11