Removing the Stand
― Before removing the stand from the monitor, place the monitor on a flat and stable surface with the screen facing down.
― The exterior may differ depending on the product.
Place the protective Styrofoam (cushion) included in the
package on the floor and place the product facing down on
the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
While holding the monitor with one hand, pull the stand
neck with your other hand to in detach the stand as shown
in the figure.
Turn the connecting screw at the bottom of the stand base
to separate it.
Remove the stand neck from the stand base by pulling it in
the direction of the arrow as shown in the figure.
Do not hold the product upside down only by the stand.
Do not press down on the monitor. There is a risk of
damaging the monitor.