Attaching the Stand
― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
― The exterior may differ depending on the product.
Insert the stand neck into the stand base in the direction
shown in the figure.
Check that the stand neck is firmly connected.
Tightly fasten the connecting screw at the bottom of the
Place the protective Styrofoam (cushion) included in the
package on the floor and place the product facing down on
the Styrofoam, as shown in the image.
If Styrofoam is unavailable, use a thick sitting mat.
Hold the back of the monitor as shown in the figure.
Push the assembled stand into the main body in the
direction of the arrow as shown in the figure.
Do not hold the product upside down only by the stand.
Do not press down on the monitor. There is a risk of
damaging the monitor.