Power Connection - AGFA PCR II Plus User Manual

Power Connection

To connect the PCR II Plus power cord:
Step 1: Make sure that the wall current matches the power specifi-
cations stated on the film recorder's serial number tag. See
Figure 2.1.
Step 2: Make sure that the PCR II Plus power switch is in the OFF
position. The power switch is located on the rear panel. See
Figure 2.2.
Step 3: Connect the female end of the power cord supplied with the
film recorder to the three-pronged socket on the rear panel.
See Figure 2.2.
2-2 • PCR II Plus User Guide
Figure 2.1. Serial Number Tag