Table of Contents
Advertisement
Quick Links
Operation & Maintenance Manual
AquaSolve
Anti-Scale Systems
Chemical-Free, Salt-Free
Scale Prevention
M8408-COM (12GPM)
M8410-COM (20 GPM)
Important: Read this Manual BEFORE using this equipment. Failure
to read and follow all safety and use information can result in death,
serious personal injury, property damage, or damage to the
equipment. Keep this Manual for future reference.
IOM-M8408_M8410-COM_EN
®
Manufacturing ASME Commercial Water Heaters Since 1961
PVI Industries • 3209 Galvez Avenue • Fort Worth, TX 76111
USA: T: (817) 335-9531 • Toll Free: (800) 784-8326 • PVI.com
Technical Support • (800) 433-5654 • Mon-Fri, 8 am - 5 pm EST
© 2019 PVI
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Watts PVI AquaSolve M8408-COM
Summary of Contents for Watts PVI AquaSolve M8408-COM
- Page 1 Operation & Maintenance Manual AquaSolve ® Anti-Scale Systems Chemical-Free, Salt-Free Scale Prevention M8408-COM (12GPM) M8410-COM (20 GPM) Important: Read this Manual BEFORE using this equipment. Failure to read and follow all safety and use information can result in death, serious personal injury, property damage, or damage to the equipment.
- Page 2 Operation & Maintenance Manual AquaSolve ® INTRODUCTION • Compatible with all on-site and community wastewater treatment systems. The PVI AquaSolve Anti-Scale System provides pro- • Perfect system for towns or communities where tection from scale formation on internal plumbing water softeners are banned or restricted surfaces.
-
Page 3: Specifications
Operation & Maintenance Manual AquaSolve ® Specifications NOTICE Spotting may occur on external plumbing surfaces. AquaSolve scale prevention system shall be installed AquaSolve media systems perform best in single pass pota- on the main water service pipe just after it enters the ble water applications with NO additional chemical additives. - Page 4 USEPA Safe Drinking Water Act (SDWA). Minerals and Metals must not exceed their individual MCLs established by the USEPA SDWA. Specific Mineral and Metal MCLs, identified in Watts’ published Feed Water Chemistry Requirements, supersede the USEPA SDWA. IOM-M8408_M8410-COM_EN Technical Support •...
- Page 5 Operation & Maintenance Manual AquaSolve ® NOTICE Replacement Media • We recommend the installation of a dual-union ball-valve on M8408-COM-RM Replace media every 3 years the inlet and outlet to isolate the tank for servicing. M8410-COM-RM Replace media every 3 years •...
- Page 6 Operation & Maintenance Manual AquaSolve ® By-Pass Valve Installation and Start-Up 5. Turn the water back on to the AquaSolve system. Slowly open the supply valve (user supplied) to the AquaSolve system. Slowly place AquaSolve By-Pass Valve into Service position (see image above for reference).
- Page 7 Operation & Maintenance Manual AquaSolve ® 12. Reinstall the distributer tube with bottom strainer NOTICE that was removed in step 6. Center the distributor Your AquaSolve media should be replaced every 3 years. tube in the bottom of the tank. Keeping any and all media from entering the distributor tube, cap Replacing the Media the top open end of the distributor tube with plas-...
-
Page 8: Limited Warranty
Installation and Operation Manual. which Watts Regulator Company has no control. This warranty shall be • Carbon replacement filter cartridges are not warranted to perform for invalidated by any abuse, misuse, misapplication or improper installation any period of time because the service life of replacement carbon of the product.
Need help?
Do you have a question about the PVI AquaSolve M8408-COM and is the answer not in the manual?
Questions and answers