Calling Preset Points - Speco 4TL User Manual

TL H.264 DVR User's Manual
• Press 1 to access the Set/Go Preset function. The Dome Preset menu is
displayed.
• Use UP / DOWN keys to select the desired preset number from the menu.
• Set the <Set Preset> of the selected preset number to <Yes>, and press
ENTER to save the position. Now the preset is set and ready to be called.
4.5.6

Calling Preset Points

Follow the steps to call preset points.
• Press a Channel key to view the corresponding camera in full screen.
• Then press DOME to enter dome control mode. A Hint Screen shown as
below figure will be displayed on the screen.
• Press 2 to hide the Dome Control Hint Screen; press 2 again to toggle the
Hint Screen.
• Press 1 to access the Set/Go Preset function.
• Use UP / DOWN keys to select the desired preset number from the menu.
• Set the <Go Preset> of the selected preset number to <Yes>, and press
ENTER to call the preset point.
• Now the selected dome camera rotates to the preset position
automatically.
40
First Page
Index
1
2
3
4
5
6
7
First Page
Index
1
2
3
4
5
6
7
Dome Preset
Set Preset Go Preset
No
No
No
No
No
No
No
Dome Preset
Set Preset Go Preset
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No