Si241304
2. Procedure to Remove Electrical Parts and PCB
Procedure
Step
1
Loosen the 2 screws of
the control box cover
and remove the control
box cover.
Remove the 2 screws
2
of the control box.
3
Pull down the control
box and let it hang by
the 2 locations in the
rear. Electrical parts
can now be removed.
Removal Procedure
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Control box cover
Control box
Procedure to Remove Electrical Parts and PCB
Control box
Rear panel
Points
3