Libelium Waspmote Plug & Sense! Series Technical Manual page 73

Sensor sockets are configured as shown in the figure below.
Sensor
Socket
Carbon Monoxide (CO) for low concentrations [Calibrated]
Carbon Dioxide (CO
Oxygen (O
Ozone (O
Nitric Oxide (NO) for low concentrations [Calibrated]
A, B, C or F Nitric Dioxide (NO
Sulfur Dioxide (SO
Ammonia (NH
Ammonia (NH
Methane (CH
Hydrogen Sulfide (H
D Particle Matter (PM1 / PM2.5 / PM10) - Dust
Temperature, humidity and pressure
E Luminosity (Luxes accuracy)
Ultrasound (distance measurement)
Figure: Sensor sockets configuration for Smart Environment PRO model
Note: For more technical information about each sensor probe go to the
Calibrated gas sensors are manufactured once the order has been placed to ensure maximum durability of the
calibration feature. The manufacturing process and delivery may take from 4 to 6 weeks. The lifetime of calibrated
gas sensors is 6 months working at maximum accuracy. We strongly encourage our customers to buy extra gas
sensors to replace the original ones after that time to ensure maximum accuracy and performance.
Sensor probes allowed for each sensor socket
Parameter
) [Calibrated]
2
) [Calibrated]
2
) [Calibrated]
3
) high accuracy [Calibrated]
2
) high accuracy [Calibrated]
2
) for low concentrations [Calibrated]
3
) for high concentrations [Calibrated]
3
) and Combustible Gas [Calibrated]
4
S) [Calibrated]
2
Development section
-73-
Models
Reference
9371-LC-P
9372-P
9373-P
9374-P
9375-LC-P
9376-HA-P
9377-HA-P
9378-LC-P
9378-HC-P
9379-P
9381-P
9387-P
9370-P
9325-P
9246-P
on the Libelium website.
v8.6