Libelium Waspmote Plug & Sense! Series Technical Manual page 100

Uploading code
Step 4: Turn on Waspmote Plug & Sense!
Be sure you have turned on the node by pressing on/off button.
Figure: Turning on Waspmote
Step 5: Open Waspmote IDE
Now run Waspmote IDE on your PC. If you do not have Waspmote IDE already installed in your PC, then go to the
Development section of Libelium website to download the latest version; there is a dedicated guide to help in the
process: "Waspmote IDE: User Guide".
If it is the first time you plug a Waspmote Plug & Sense! on your PC and you are unable to see the proper USB port,
maybe you should install the latest FTDI drivers: http://www.ftdichip.com/Drivers/D2XX.htm
Moreover, if you have troubles installing FTDI drivers and your computer is unable to recognize Waspmote,
please follow the installation guide for your operating system on your next link: http://www.ftdichip.com/Support/
Documents/InstallGuides.htm
-100- v8.6