Infinite AERINOS User Manual page 20

<V2>,
<Vn>,
<Vn+1>
If the Alternate Rate set is active ( Alternate Sampling Period # 0):
<0>,
<V1>,
<V2>,
<Tn>
<Vn>,
<Vn+1>
Compressed Data Format (Sensor Scale) has the following structure:
If the Alternate Rate set is inactive ( Alternate Sampling Period = 0):
<V1>,
<V1>,
<Vn>,
<Vn+1>
If the Alternate Rate set is active ( Alternate Sampling Period # 0):
<0>,
<V1>,
<V1>,
<Tn>
<Vn>,
<Vn+1>
*) Time Offset is in decimal form.
4.12.3 Data Message Idle Period
0655,t
0655: Command ID
t: 0-180, Period [sec], Default: 120
Scope: COMM_MCU
Use this parameter to set an idle time Period after the Data Message transmission.
The GMS Modem will remain connected to the GSM Provider network for this Period,
waiting for receipt of SMS containing Configuration or Verification commands.
BSC-50D User Guide
First record of CNT1 (If logged)
...
Last record of Temperature (If logged)
Last record of CNT1 (If logged)
Offset to Timestamp of first record (=0)
First record of Temperature (If logged)
First record of CNT1 (If logged)
...
Offset to Timestamp of first record [min]*
Last record of Temperature (If logged)
Last record of CNT1 (If logged)
First record of Temperature (If logged)
First record of CNT1 (If logged)
...
Last record of Temperature (If logged)
Last record of CNT1 (If logged)
Offset to Timestamp of first record (=0)
First record of Temperature (If logged)
First record of CNT1 (If logged)
...
Offset to Timestamp of first record [min]*
Last record of Temperature (If logged)
Last record of CNT1 (If logged)
20