Removal Of The Filter Cartridge; Mounting The Filter Cartridge; Electrical Hook-Up Of The Hood - DeDietrich DHD770X Manual To Installation

-REMOVAL OF THE FILTER CARTRIDGE (Fig. 3A)
-MOUNTING THE CARBON FILTER (Fig. 13Z)
1. Remove the cartridges.
2. Position the carbon filter on the cartridge inside the hood.
3. Repeat the operation for all of the cartridges.
- ELECTRIAL HOOK UP OF THE HOOD
This appliance is fitted with an H05 VVF 3 conductor, 0.75 mm2 (neutral, phase, and
ground) power cable. This can be hooked up to a 220 – 240 V mono-phase electrical
network by way of a CEI 60083 regulation power socket that must remain accessible after
installation, in conformity to installation regulations.
We decline all responsibility in case of accident caused by a lack of ground connection
or incorrect ground connection. The fuse used must be 10 or 16 A. If the power cable is
damaged, call the after-sales service to avoid any risk.
Attention
If the hood presents some form of anomaly, unplug the appliance or remove the fuse corre-
sponding to the appliance's power line.
35