Safety Rules For Conveyers And Spraying Machines; Protective Devices For Personnel; 4.1.6 Other Suggestions - UTIFORM Delta-Mini Instructions Manual

Mini Pump
4.1.4

Safety rules for conveyers and spraying machines.

This type of machine should only be used by qualified and responsible personnel
(foreman) who have been specifically appointed by building company. They should
be instructed in the handling and maintenance of the machine and be familiar with all
its workings.
The machine must be installed where it will be stable and secured against any
accidental movement.
Machines running on electricity must be connected to a special socket (normally a
current transformer for building sites), in accordance with paragraph 55 of regulation
VDE 0100/5.
The machine must be installed where it is in no danger from falling objects or else
shielded with a protective material. The pipes must be laid in such as way that they
will not be damaged.
If the safety devices on the machine either activate or fail to work correctly, the
machine should be stopped until the problem has been corrected.
Before opening the joints on the conveying pipes or other parts of the system that are
under pressure, the foreman must make sure there is no pressure in the system.
Blockages should be eliminated following the indications in the instructions for use.
The person in charge of eliminating blockages must position himself in such a way
that he will not be hit by the mortar coming out. There should be nobody else nearby
when this task is being carried out.
4.1.5

Protective devices for personnel

The building company must provide personnel with adequate means for individual
acoustic protection if the noise in the workplace reaches over 85 dB(A).
All personnel must use this acoustic protection for levels of 90 dB(A) or higher.
Protective glasses must be provided for the task of eliminating blockages. Protective
glasses are considered to be glasses with a frame that meets part 2 of the DIN 58 211
regulation and lenses that meet page 5 of the Din 4647 regulation.

4.1.6 Other suggestions

It is recommended that only original spare parts and accessories are used.
No modifications should be made to the original machine.
9