Using The Hotspot On Your Smartphone - Sensors & Software LMX100 User Manual

If you have more than four screenshots saved, you can view the others by either swiping on the
screen (right and left), or using the 4 way directional arrows. To select a particular screenshot,
touch the screen directly, or use the 4 way directional arrows. From here you have the option
to:
•
Email – Pressing this will allow you to email the screenshot as a mini-report, provided
you're connected to a Wi-Fi network and have a sending email address saved on the
system. You will see the same email prompts as shown in
•
Expand – This will enlarge the selected screenshot to full screen (Figure 7-4)
Press Tile View to return to the view showing four per page.
•
Delete – This will delete the selected screenshot. A confirmation message will appear
asking if you want to proceed with this.
•
Delete All – This will delete ALL screenshots. A confirmation message will appear
asking if you want to proceed with this.
•
Exit – this will return you to the main screen. The next time you enter Screenshot
Gallery it will show the same view that you left with, Tiled or Expanded.

7.3 Using the Hotspot on your Smartphone

If a Wi-Fi signal in unavailable, you may be able to use your Smartphone as a Wi-Fi access
point, by creating a Personal Hotspot. If you are experiencing difficulty connecting to a cell
phone Personal Hotspot, ensure that the phone is in discovery mode while connecting. On
iPhone (iOS 9.0), for example, this involves going to Settings - Personal Hotspot (Figure 7-5).
Ensure that the Personal Hotspot setting is turned on, and wait on this screen until the LMX100
connection has been established. Once you have received confirmation on the Display Unit, the
cell phone can resume normal use.
Figure 7-4: Screenshot Gallery – Expanded View
49
Screenshots & Mini-Reports
Section 7.1.