Cleaning - Vornado 533DC Owner's Manual

CONTROLS
(MODELS 533DC & 633DC)
8
English

CLEANING

GRILL REMOVAL (MODELS 533DC, 633DC, 683DC)
WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grill.
1. Remove the 3 screws located in between
the ribs of the inlet grill at roughly 10, 2,
and 6 o'clock positions. Screw locations are
also indicated with an arrow* (
circulator. Do Not remove the 2 screws
on the pivot arms. Release the Front Grill
Clips located at the 2, 5, 7 and 10 o'clock
positions.
2. Dust or wash Front Grill with a mild dish-
washing soap. Do not place grill in the
dishwasher. The excessive heat can distort
the plastic.
3. To reattach - align the Front Grill Clips with
into place. Replace all the screws.
VARIABLE SPEED CONTROL
Use the brush attachment on your household
1. Rotate knob to the right to
vacuum cleaner to vacuum any accumulated
turn on and increase speed. dust off the Front Grill and Air Inlets.
2. Rotate knob to left to lower
speed and turn off.
Screwdriver required.
Front Grill Clip
) on the
Screw
Front Grill Clip
Front Grill Clip
Screw
Note: The motor
is permanently
lubricated and
requires no oiling.
Front Grill Clip
Screw
9
English