Please refer to our website for the most current on cord or place the cord under strain. To unplug, grasp the plug, or repairs must be done by a Vornado Authorized Service Center. should always be followed to reduce the risk of fire, electric shock and version of our owner’s guide.
Therefore, the appliance should be placed near the socket outlet and easily accessible. DISPOSAL Save energy by maximizing the performance of heating and cooling systems. When you use a Vornado Air Circulator, you will not have to Dispose of all packaging materials in an environmentally WARNING set your summertime thermostat as low or your wintertime thermostat as high.
STAND ASSEMBLY & ADJUSTMENT GETTING STARTED (MODEL 683DC) (MODEL 683DC) No tools required. STAND ASSEMBLY HEIGHT ADJUSTMENT (32 - 38 INCHES) 1. Place the circulator head face down on 1. Support the Circulator Head (G) with one hand. the ground on a soft surface. Use your other hand to loosen the Adjustment 2.
GETTING STARTED CLEANING (MODELS 533DC & 633DC) GRILL REMOVAL (MODELS 533DC, 633DC, 683DC) Screwdriver required. WARNING: To reduce the risk of electrical shock and injury to persons, unplug the circulator before removing grill. 1. Remove the 3 screws located in between the ribs of the inlet grill at roughly 10, 2, and 6 o’clock positions.
Under certain conditions, it is possible for a reset GFCI (Ground Fault Circuit Interrupter) outlet to trip the corresponding flat side on the when the user is changing speeds on a Vornado circulator. In this event, change to an outlet that is not blade’s socket. Push the blade all connected to a GFCI device.