Step 2. Make Connections to the Motherboard
This section tells how to connect internal peripherals and power supply to the Motherboard.
Internal peripherals include IDE devices (HDD, CD-ROM), Floppy Disk Drive, Chassis Fan,
Front Panel Devices (Turbo LED, Internal Speaker, Reset Button, IDE LED, and KeyLock
Switch.), Wake-On-LAN card, VGA card, Sound Card, and other devices.
For more details on how to connect internal and external peripherals to your new SY-6ZB
Motherboard, please refer to SY-6ZB Motherboard User's Guide and Technical Reference
online manual on CD-ROM.
Connectors and Plug-ins
PCI Audio Card Header: SB-Link ™ (PC-PCI)
Connect the SB-Link ™ (PC-PCI) cable from your
PCI audio card to this header.
CPU Cooling Fan: CPUFAN
Pin1
Pin2
GND
12V
Power LED Key Lock
_
+
+
+
Reset PWRBT Turbo LED HDD LED
HDD LED
Pin1
Pin2
LED Anode LED Cathode LED Cathode
IrDA (Infrared Device Header): IR1
Pin1
Pin2
Pin3
VCC
None
IRRX
ATX Power On/Off: PWRBT
Connect your power switch to this
header (momentary switch type).
To turn off the system,
please press this switch and
hold down for longer than
4 seconds.
Pin3
SENSOR
Speaker
Power LED
_
Pin1
5V
_
_
+
Pin1
5V
Turbo LED
Pin1
Pin2
GND
Pin4
Pin5
Connect the AT Power cable to this
GND
IRTX
connector. If you use AT power supply.
ATX Power Supply: ATX PW
Attach the ATX Power cable to this connector.
Note: Please make sure the ATX power supply is able to
provide at least 720mA of current on the +5VSB lead if
you want to enable the advanced power management
functions, like Wake-On-LAN, Power-On by keyboard, etc.
7
SY-6ZB Quick Start Guide
Wake-On-LAN Header: JP44
Pin1
Pin2
5VSB
GND
Chassis Fan: CHAFAN
Pin1
Pin2
GND
12V
Pin1
Pin2
Pin3
NC
GND Control Pin
Speaker
Pin2
Pin3
NC
NC
PWRBT
Pin1
Pin2
Power On/Off
GND Power Good GND
AT Power Cable
Pin3
MP-Wakeup
Pin3
SENSOR
Keylock
Pin2
GND
Pin4
Speaker out
RESET
Pin1
Pin2