Radio Operation; Presetting Station; Listen To Preset Memory Stations; Sleep Function - Southwestern Bell GH3060 Owner's Manual

Radio Operation

2. Press the FUNCTION button, the
display will show "FM".
FM MHZ
3. You can select "FM" or "AM" band by
pressing the or button, then press
the ENTER button to confirm.
AM KHZ
4. Tune to the desired station by pressing
the or button. Each time you press
the button , the frequency will change
by one step.
5. You can also use automatic tuning .
Keep the or button pressed until
the frequency starts to change rapidly,
then release the button and it will stop
at the next strong station.
6. When listening to the radio, you can
adjust the volume or to select a
suitable listening level.
7. To turn off the radio, press the RADIO
ON/OFF button.
AM KHZ

Presetting Station

1. Press the RADIO ON/OFF button to
turn on the radio.
2.Press the FUNCTION button. The
display will show "FM".
3.You can select "FM" or "AM" band by
pressing the or button, then press the
ENTER button to confirm.
4. Press the or button to select a station
which you want to save.
5. Press and hold the SET button about one
second. "PROG" icon will flash on the LCD
display.
PROG
FM MHZ
6. While the PROG is blinking, press the
or button to choose a desired memory
location. You can choose from CH1 to CH10 .
7. Press the ENTER button to confirm.
The station now broadcasting will be
stored in the preset memory.
8.By repeating the above steps 3 to 7 ,
you can store other stations in the memory .
NOTE:
Up to 10AM and 10FM stations can be
stored into preset memories.
23
Radio Operation

LISTEN TO PRESET MEMORY STATIONS

1. Press the RADIO ON/OFF button to turn on the radio.
2. Press the FUNCTION button to select "AM" "FM" , then press the ENTER
button to confirm.
3. Press the SET button once, the latest location will be kept. You can select the
desired memory by pressing or button.
4. To turn off the radio, simply press the RADIO ON/OFF button.

SLEEP FUNCTION

If you want the radio turned off after a desired playing time. You can follow the below
steps.
1. During Radio play, or in the standby mode, press the SET button. The LCD will show
"SLEEP 15".
2. Press or button repeatedly to select the desired playing time . The display
sequence is 15 minutes 30 minutes
3. Press ENTER button to confirm, "sleep" icon will turn on.
NOTE:
During sleep mode, the wake up to buzzer/radio function still works .
60 minutes 90 minutes SLEEP OFF.
24