Advertisement
VSP HOOD SYSTEM:
VSP HOODS are U/L Listed to the applicable
Southern Pride oven models and are NSF Certified.
HOOD SYSTEM TO INCLUDE:
1. Ventilation Hood
2. Two speed fan (1380/2000)
3. Curb with vented extension and hinge kit
(Specify roof pitch)
4. Grease capture trough
5. Combustion chamber flue vent
SUPPLIED BY CUSTOMER:
6. Duct from hood to fan
NOTE: If you have a duct longer than 10 feet or an
elbow in your duct your installation, it may require a
larger capacity exhaust fan. Please specify your duct
requirements when ordering the VSP Hood System.
ALL MODELS MAY ALSO BE INSTALLED UNDER A CANOPY HOOD RATED
The oven's minimum clearances from combustible materials are 18" on left side, 24" on right, 18" on top,
48" from front, and 2" on back. Minimum clearances 18" to chimney connector and to smoke extractor chimney
connector. Floor may be constructed of a combustible material. (Note: minimum clearance dimensions are from
the oven cabinet, not from component cover.) (If provision is made for access to service, minimum clearance can
be reduced to 2" on left side.) May be installed through wall with zero clearance with BBR kit No. 2099.
ANY VENTILATION SYSTEM MUST BE INSTALLED IN ACCORDANCE WITH LOCAL CODES.
CONSULT WITH LOCAL OFFICIALS AND A COMMERCIAL KITCHEN VENTILATION
Southern Pride Distributing, L.L.C.
2102 East Main Street - Marion, Illinois 62959
www.southern-pride.com
Sales: 800-851-8180
VENTING INSTALLATION
Purchased through Southern Pride
BBR-79-1-FL with recommended
optional VSP Vent Hood System.
FOR COMMERCIAL COOKING APPLIANCES.
CONTRACTOR PRIOR TO INSTALLATION.
sales@sopride.com
Service: 800-437-2679
BBR-79-1
6
1
48
13/32"
18
1/32"
20"
Phone: 618-997-9348
Fax:
service@sopride.com
Service Fax: 618-993-0378
2
4
3
SPECIFY ROOF
PITCH WHEN
ORDERING
5
* * * * *
618-993-5960
parts@sopride.com
9/15/04
Advertisement
