Southbend 1184093 Operator's Manual page 14

I
NSTALLATION
Step 4: Installation of Optional Open Storage
The following describes how to assemble the optional open storage. All holes are pre-drilled for the
provided screws.
1. Attach the legs to the oven as described in installation Step 2b on page 9.
2. Attach the two rack guides to the bottom of the oven using two clips and four screws for each rack (see
figure "A" below).
3. Position the shelf below the rack guides and lift it so that the bottom ends of the rack guides pass
through the holes in the shelf (see figure "B" below)
4. Secure the shelf to the rack guides with four clips, each secured by two screws that thread into the
threaded holes on the shelf (see figure "C" below).
5. Attach the rack-stop using two screws. Attach the top of the rack stop to the bottom of the oven, and
the bottom of the rack stop to the shelf (see figure "D" below).
A
C
P 14
AGE
H -S E
ALF IZE LECTRIC
B
D
O ' M 1184093
PERATOR S ANUAL
C O
ONVECTION VENS