Assembly - Waveshare Pan-Tilt HAT User Manual

Pan-Tilt HAT User Manual

ASSEMBLY

Note: Before you assemble servos to Pan-Tilt HAT, please test the servo with test
codes to avoid of servo stuck when rotate
1. Connect servos to Pan-Tilt HAT
Brown wire
Red wire
Yellow wire
You should connect the Pan servo (close to HAT board) to S1, and connect Tilt
servo (close to camera) to S0. Please adjust the angle of the servo when assembling by
using the test codes, avoiding of damaging.
Version: V1.0.0; Date: 2019.03.16
GND
5V
S1/S0
8 / 17