How To Use; Download Examples - Waveshare Pan-Tilt HAT User Manual

Pan-Tilt HAT User Manual
TSL2581 Datasheet Page 13
Note: The default I2C address pins are set as A5=A4=A3=A2=A1=0, address is 0x40.
I2C address pins are set as Float and its I2C address is 0x39 by default. If you use the
module with other development board, please add R/W bit to Low bit

HOW TO USE

This part shows you how to use the module based on demo codes provided on wiki

DOWNLOAD EXAMPLES

Search with key word "Pan-Tilt HAT" on Waveshare Wiki, open the wiki page and
download examples:
Uncompressing the 7z, you can get files as below:
Servo Driver: Examples which test servos (BCM2835, WiringPi and Python)
Light Sensor: Ambient light sensing examples (BCM2835, WiringPi and Python)
test: test codes, used before assembling
web_Python: Remote control example
Version: V1.0.0; Date: 2019.03.16 5 / 17