Wiring Diagram - Makita HR2450FT Technical Information

W
iring diagram
Fix field lead wire (black)
with lead holder as per
the illustration.
Fix brush holder's
lead wire (red) and
field lead wire (white)
with lead holder as per
the illustration.
* Do not slack brush holder's lead
wire (red) between brush holder and
lead holder.
Fix field brush holder's
lead wire (blue) and
field lead wire (black)
with lead holder as per
the illustration.
Fix lead wires which are passed
through this area, with any of
these lead holders.
LED circuit
HR2450FT
LED
job-light
Fix lead wire (white) of
LED job-light with
lead holder as illustrated.
LED
job-light
Fix field lead wire (black)
with lead holder as per
the illustration.
Fix noise suppressor's
lead wire (clear) with
lead holder as per the
illustration.
Fix brush holder's
lead wire (blue) and
field lead wire (black)
with lead holder as per
the illustration.
* Pass brush holder's lead wire (blue)
under the field lead wire (black).
* Do not slack brush holder's lead
wire (blue) between brush holder and
lead holder.
Fix the following lead wires with this
lead holder.
* Brush holder's lead wire (red)
* 2 field's lead wires (black)
* Noise suppressor's lead wire (clear)
Noise suppressor
Noise suppressor is not
used in some countries
LED circuit
Noise suppressor
LED lead wires
(blue or red)
Lead wires of power supply cord,
and grounding lead wire (clear)
Pass LED lead wires, lead wires of power supply
cord and grounding lead wire as illustrated
above.
P 20 / 22
Bottom view
of handle portion