Do you have a question about the REFERENCE 405 and is the answer not in the manual?
Questions and answers
Zainuddin
February 28, 2025
Untuk speaker pintu 4+subwoofer 1
Diagram pemasangan nya gimana ?
1 comments:
Mr. Anderson
February 28, 2025
To install the Soundstream Reference 405 amplifier with 4 door speakers and 1 subwoofer, follow these steps:
1. Power and Ground Wiring: - Use high-quality, low-loss power and ground cables. - Connect a 4-gauge power cable from the battery to the amplifier. - Ground the amplifier securely to the vehicle chassis.
2. Speaker Wiring: - Channels 1 and 2: Connect to the front door speakers. - Channels 3 and 4: Connect to the rear door speakers. - Channel 5 (subwoofer channel): Connect to the subwoofer.
3. Speaker Output Mode Selection: - Ensure channels 1-4 are set to operate in stereo mode for full-range sound. - Set the subwoofer channel to low-pass mode.
4. Bass Control and Frequency Adjustment: - Use the Hawkins Bass Control to tailor the subwoofer response. - Adjust the frequency and boost settings as needed.
5. Testing and Final Adjustments: - Play test audio and adjust gain levels for balanced output. - Fine-tune crossover settings to match speaker specifications. - Ensure all connections are secure and free of distortion.
This setup ensures optimal performance from the Reference 405 with 4 door speakers and a subwoofer.
Need help?
Do you have a question about the REFERENCE 405 and is the answer not in the manual?
Questions and answers
Untuk speaker pintu 4+subwoofer 1 Diagram pemasangan nya gimana ?
To install the Soundstream Reference 405 amplifier with 4 door speakers and 1 subwoofer, follow these steps:
1. Power and Ground Wiring:
- Use high-quality, low-loss power and ground cables.
- Connect a 4-gauge power cable from the battery to the amplifier.
- Ground the amplifier securely to the vehicle chassis.
2. Speaker Wiring:
- Channels 1 and 2: Connect to the front door speakers.
- Channels 3 and 4: Connect to the rear door speakers.
- Channel 5 (subwoofer channel): Connect to the subwoofer.
3. Speaker Output Mode Selection:
- Ensure channels 1-4 are set to operate in stereo mode for full-range sound.
- Set the subwoofer channel to low-pass mode.
4. Bass Control and Frequency Adjustment:
- Use the Hawkins Bass Control to tailor the subwoofer response.
- Adjust the frequency and boost settings as needed.
5. Testing and Final Adjustments:
- Play test audio and adjust gain levels for balanced output.
- Fine-tune crossover settings to match speaker specifications.
- Ensure all connections are secure and free of distortion.
This setup ensures optimal performance from the Reference 405 with 4 door speakers and a subwoofer.
This answer is automatically generated