Table of Contents
Advertisement
SYSTEM DlAGRAM# 3
Channels of input: 6
Subwofer Channel Impedance: 2 ohms
High Power/High Current Setting: High her
adjust subwoofer level.
0 0 I E s
24 dBPct
HEAD UW
I
REFERENCE 405
W E L L E S
5
Channels of input: 2
Subwofer Channel Impedance: < 1 ohm
High Power/l-iigh Current Setting: High Current
L 0 0 I E s
Front Pcnel Connedions
TO+ l2V
+
24 dsloct
Settings
4
REFERENCE 405
12 dBDct
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the REFERENCE 405 and is the answer not in the manual?
Questions and answers
Untuk speaker pintu 4+subwoofer 1 Diagram pemasangan nya gimana ?
To install the Soundstream Reference 405 amplifier with 4 door speakers and 1 subwoofer, follow these steps:
1. Power and Ground Wiring:
- Use high-quality, low-loss power and ground cables.
- Connect a 4-gauge power cable from the battery to the amplifier.
- Ground the amplifier securely to the vehicle chassis.
2. Speaker Wiring:
- Channels 1 and 2: Connect to the front door speakers.
- Channels 3 and 4: Connect to the rear door speakers.
- Channel 5 (subwoofer channel): Connect to the subwoofer.
3. Speaker Output Mode Selection:
- Ensure channels 1-4 are set to operate in stereo mode for full-range sound.
- Set the subwoofer channel to low-pass mode.
4. Bass Control and Frequency Adjustment:
- Use the Hawkins Bass Control to tailor the subwoofer response.
- Adjust the frequency and boost settings as needed.
5. Testing and Final Adjustments:
- Play test audio and adjust gain levels for balanced output.
- Fine-tune crossover settings to match speaker specifications.
- Ensure all connections are secure and free of distortion.
This setup ensures optimal performance from the Reference 405 with 4 door speakers and a subwoofer.
This answer is automatically generated