Projector Setup And Installation Options; Focusing The Image Using The Focus Lever - Epson EF-100W User Manual

Projector Placement
Warning
• You must install a ceiling mount when suspending the projector from a ceiling.
If you do not install the projector correctly, it could fall and cause damage or
injury.
• Do not use adhesives on the ceiling mount fixing points to prevent the screws
from loosening, or use lubricants, oils, or similar substances on the projector; the
projector case may crack causing it to fall from its ceiling mount. This could
cause serious injury to anyone under the ceiling mount and could damage the
projector.
• Do not cover the projector's air intake or air exhaust vents. If the vents are
covered, the internal temperature could rise and cause a fire.
• Do not install the projector on an unstable surface or in a location beyond the
weight specifications of the projector. Otherwise, it could fall or topple causing
an accident and injury.
• When installing the projector in a high position, take measures to prevent falling
by using belts to ensure safety in an emergency, such as an earthquake, and to
prevent accidents. If it is not installed correctly, it could fall causing an accident
and injury.
• Do not install the projector in locations exposed to high humidity and dust, such
as on a kitchen counter, in the kitchen, or near a humidifier, or in locations
exposed to oil smoke or steam. Doing so could cause fire or electric shock. In
addition, the oil content could cause the projector's outer case to deteriorate and
could cause the projector to fall off from the ceiling where it is suspended.
Attention
• If you are using the projector at altitudes above 1500 m, set the High Altitude
Mode setting to On in the projector's menu to ensure the projector's internal
temperature is regulated properly.
s Settings > Installation > High Altitude Mode
• Try not to setup the projector in locations subject to high humidity and dust, or
in locations subject to smoke from fires or tobacco smoke.
• If the internal temperature of the projector gets too high due to the installation
environment, select the Rear Bay Cooling setting in the projector menu to cool
the streaming media player connected to the projector.
s Settings > Operation > Rear Bay Cooling
g g Related Links
• "Projector Setup and Installation Options" p.16
• "Projection Distance" p.17
• "Image Shape" p.32
• "Projector Feature Settings - Settings Menu"
• "Adjusting the Image Height"
• "Resizing the Image with Zoom"
• "Focusing the Image Using the Focus Lever"

Projector Setup and Installation Options

You can set up or install your projector in the following ways:
Front/Rear
Front Ceiling/Rear Ceiling
p.61
p.31
p.37
p.36
16