Wiring Diagram - Soundstream REFERENCE A 10.0 Owners And Installation Manual

Class A
8
(Continued from page 12)
of blown power supply fuse, the "Fault" indicator on the top panel will light.
The fuse is accessible from the front panel of the amplifier. See the chart
below to determine the fuse value. Never replace the fuses with a higher
value than what is supplied. This may result in amplifier damage and will
REFERENCE Class A Amplifier Fuse Values
Amplifier Amplifier Fuse
40 amp Maxi-Fuse
Class A 5.0
Class A 10.0 80 amp Maxi-Fuse
REMOTE TURN-ON
Connect the "Remote" to the turn-on lead from the source unit. When +12
volts is received, the amplifier will turn on.
SIGNAL CABLE
Use a high-quality cable that will be easy to install and has minimal signal loss
to guarantee optimum performance.
ideal when using the Unbalanced RCA inputs. While using the Balanced DIN
input, use the cable supplied with the BLT.
SPEAKER CABLE
The REFERENCE Class A amps will accept up to 8 gauge speaker cable.
Use a high quality, flexible, multi-strand cable for best performance and
longevity. Soundstream Speaker120 & 160 (12 and 16 gauge) are ideal.

WIRING DIAGRAM

Battery Fuse /
Circuit Breaker
60 amp
100 amp
Soundstream's DL1 and SL1 are
13