Shutter/ Blind Function Details; Types Of Mechanisms - Panasonic WRKT4504E Series Reference Manual

Switching/Blind Actuator
Name
Scene1 reacts to
(from Scene1 to Scene8)
Blind position in Scene 1 [%]
(from Scene1 to Scene8)
Permit teach in Scene1
(from Scene1 to Scene8)

4.2.3 Shutter/ Blind Function Details

4.2.3.1 Types of Mechanisms

There are two basic blind mechanisms.
 Venetian blind (jalousie, i.e.blind with slats)
 Shutter roller ( roller blinds, awnings)
A Venetian blind (or venetian blind) has horizontal slats, one above another. They are suspended by
strips of cloth called tapes, or by cords, by which all slats in unison can be rotated through nearly 180
degrees. In this drive mode, the slats are directly adjusted by way of mechanical linkage when the
height of the blind is changed. The actuator assumes that the slats are completely closed when the
blind moves downwards and similarly, the actuator assumes that the slats are completely open when
the blind moves upwards, or vice versa. This is dependent of the blind driving type mechanism.
Complete runtime up parameter specifies how long the blind travels from lower end point to upper end
point. In some cases the extension time can be used additionally with the complete runtime. The
extension time can be set from Extension time parameter from Blind general page.
Value
No scene number
Scene number1 *1...64+
Description
These parameters sets the included scenes
for each of 8 scene according to activation
number. For each scene (from scene1 to
scene8), there are 64 selection number
from scene number 1 to scene number 64.
[0..100] This parameter sets the switching state
when the Scene1 is called. (from Scene1 to
Scene8)
No This parameter specifies permission for
Scene 1 saving after downloading from ETS.
Yes (from Scene1 to Scene8)
34