PC software and serial communication
Danfoss offers various options for serial communication.
Using serial communication, it is possible to monitor,
program and control one or several frequency
converters from a centrally located computer.
All VLT 7000 Booster units have a RS 485 port
and the FC protocol as standard.
Using the RS 485 port enables communication, e.g.
TM
with a PC. A Windows
available for this purpose. It can be used to monitor,
program and control one or several VLT 7000 Booster
units. For further information, contact Danfoss.
500-566
Serial communication
NB!:
Information on the use of RS-485 serial interface
is not included in this manual.
10
program, called MCT 10, is
VLT® 7000 Booster
MG.70.A1.02 - VLT is a registered Danfoss trademark