Ud/M 1.300.1 Universal Dim Actuator Module, 1-Fold, 300 Va; Technical Data - ABB i-bus EIB Product Manual

®
ABB i-bus EIB / KNX
2.3 UD/M 1.300.1 Universal
Dim Actuator Module,
1-fold, 300 VA
2.3.1

Technical data

Power supply / incoming supply
Outputs
Connections
Ambient temperature range
Design
CE norm
© 2004 ABB STOTZ-KONTAKT GmbH
Device technology
The Universal Dim Actuator Module is operated in a module slot of the
Room Controller Basis Device. It is used to dim a group of luminaires.
Various types of loads such as incandescent lamps, high voltage halogen
lamps or low voltage halogen lamps on electronic or conventional
transformers can be operated on the dimmable output. When connecting low
voltage halogen lamps, ABB transformers are recommended.
When the incoming supply is restarted (after disconnection from supply for
more than approx. 10 seconds), the device conducts a load test and adapts
the operating mode accordingly. When the load type is changed, the device
must be de-energised.
Both the incoming supply and the internal voltage are supplied via the Room
Controller Basis Device. Contact is automatically established when the
modules are snapped in place.
– Operating voltage
– Incoming supply
– 1 dimming output
– Maximum output capacity
– Minimum output capacity
– Dimming output
– Wire ranges
– Storage
– Transport
– Type of installation
– Housing, colour
– Housing dimensions (WxHxD)
– Weight
– in accordance with the EMC guideline and
the low voltage guideline
made available via the Room Controller Basis
Device, contact made via contact system on
base of module
90 ... 253 V AC, contact established via
contact surfaces at the front
Semiconductor output, dimmed via phase
control or phase alignment
300 VA at 230 V AC
150 VA at 127 V AC
2 VA
3-pole, plug-in screw terminal
2
0.2...2.5 mm finely stranded
2
0.2...4.0 mm single-core
-25 °C ... 55 °C
-25 °C ... 70 °C
For snapping into the
Room Controller Basis Device
Plastic housing, anthracite, halogen-free
49 x 42 x 93 mm
0.12 kg
9