Chapter 1: Introduction; Overview - Xilinx Alveo U50 User Manual
Programming cable
Hide thumbs
Also See for Alveo U50:
- User manual (31 pages) ,
- Installation manual (51 pages) ,
- Installation manual (37 pages)
Table of Contents
Advertisement
Chapter 1: Introduction
Overview
The Alveo™ Programming Cable provides development access for debug-port enabled Alveo Cards
allowing the card to be programmed. The Alveo programming cable consists of a programming
module, ribbon cable and USB cable. Debug-port enabled Alveo cards have a 2x15-pin connector,
which connects to the programming module via the ribbon cable. The programming module connects
to the host computer via micro-USB, which also provides power. This setup is shown in
Figure
7.
The following cards include a debug-port and support the Alveo Programming Cable:
U50/U50DD
•
Alveo Programming Cable User Guide
4
Send Feedback
UG1377 (v2019.1) September 17, 2019
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Alveo U50 and is the answer not in the manual?