Table of Contents
Advertisement
General Information and Instructions
ASSEMBLY AND OPERATON INSTRUCTIONS
BEFORE USE
When unpacking, checking to make sure all parts shown are included.
INSTALLATION (See Fig 1)
1. The tabletop butcher saw is fully assembled and is ready to be used right out of the box.
2. The tabletop butcher saw should be put on a flat, level surface capable of withstanding vibration.
3. Open the door cover (#37) of the machine and inspect if the saw blade is correctly fixed on the
top and belt of the wheels (#18, #25); the teeth edge of the blade should be flush with edge of the
wheels.
4. Close the door cover (#37), and turn the wheel control knob (#12) counterclockwise, then plug the
saw in.Turn on the white switch to start the work and turn off the black switch to stop. When the
machine works, check that the blade drives in a clockwise manner.
Top Wheel
Door Cover
Safety Fence
Thickness Adjustor
Bottom Wheel
6
Tension Knob
Wheel Control Knob
Wheel Control Knob
Fig. 1
Power Cord
Advertisement
Table of Contents
