Specific Product Warnings And Precautions - Backyard Pro 554BSSW65AL Instruction Manual

65” blade tabletop butcher saw
Table of Contents

Advertisement

Warnings

SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS

• GROUND THIS PRODUCT. The electrical power cord
• for this product is equipped with a grounded
• 3-prong plug. Never remove the grounding prong or modify the plug in any way. Do not use adapter
plugs with this product. When in use, make sure this product is always plugged into a grounded
• 3-hole electrical receptacle with an appropriate breaker switch in-line.
• MAKE SURE THE POWER SWITCH IS IN THE "OFF" POSITION BEFORE PLUGGING IN THE POWER
CORD.
• DO NOT ABUSE THE POWER CORD. Do not use the cord to pull the 3-prong plug from a power
outlet. Keep the cord away from heat, oil, sharp edges, and moving parts. Replace a damaged cord
immediately. Route the power cord safely. Do not route the cord where it can be walked on or
tripped over.
IF YOU USE AND EXTENSION CORD, MAKE SURE TO USE ONLY UL APPROVED CORDS WITH THE
CORRECT GAUGE AND LENGTH. SEE BELOW:
Nameplate
Amperes
25'
0-5
16
5.1-8
16
8.1-12
14
12.1-15
12
15.1-20
10
• MAINTAIN A SAFE WORK ENVIRONMENT. Do not use this product in or near damp or wet areas. Do
not expose this product to rain. Keep work area well lit. Make sure there is adequate surrounding
work space. Use this product in a well ventilated area. Do not operate this product in the presence
of flammable liquids, gases, or dust. To avoid accidental electric shock, do not let your body come
in contact with grounded surfaces such as pipes, radiates, ranges, and refrigerators.
• KEEP ALL GUARDS IN PLACE AND IN WORKING ORDER.
• REMOVE ALL ADJUSTING WRENCHES FROM THE MEAT SAW BEFORE TURNING IT ON.
• AVOID UNINTENTIONAL STARTING. Making sure you are prepared to begin work before turning the
START switch on.
• BEFORE USING THE TABLETOP BUTCHER SAW, MAKE SURE THE SAW BLADE IS PROPERLY MOUNTED.
Make sure the saw blade is balanced, its tension and tracking are properly adjusted, its teeth point
downward and toward the left side of the working Table, and it is not bent or cracked.
4
Extension Cord Length
50'
75'
16
16
16
14
14
12
12
10
10
10
100'
150'
14
12
12
19
10
-
10
-
-
-
200'
12
-
-
-
-

Advertisement

Table of Contents
loading

Table of Contents