Model Description - Sub-Zero Built-In Series Technical & Service Manual

General Information
MODEL DESCRIPTIONS
The diagram below (See Figure 1-2) explains the full model number code of the Built-in Series. The tables starting
on the following page list the basic model numbers, which are all the digits up to the letter after the first forward
slash, and are accompanied by diagrams of the basic models.
NOTE: Functional parts are common to each model configuration, meaning for example, models BI-36UG/S/PH-RH,
BI-36UG/S/PH-LH, BI-36UG/S/TH-RH , BI-36UG/S/TH-LH, etc., will utilize common functional parts. For this rea-
son, only the basic model numbers are used in this manual , unless otherwise specified.
Additional Model Type Information:
NOTE: If needed.
G = Glass Refrigerator Door
A = High Altitude Glass Refrigerator Door
D = Ice & Water Dispenser
Model Type:
S = Side-by-Side
U = Over / Under
R = All Refrigerator
F = All Freezer
BI-36UG/S/PH-RH
Model Line and
Domestic/International Identifier:
BI = Domestic Built-in Model Line
ICBBI = CB Approved International
Built-in Model Line
#7005333 - Revision A - January, 2008
Built-In (BI) Series
Built-In (BI) Series
Trim Style:
/F = Framed
/O = Overlay
/S = Stainless Steel
Nominal Cabinet Width:
Currently 30", 36", 42" and 48"
Figure 1-2. Model Number Code
1-6
Door Swing:
NOTE: Only present if model
is door swing sensitive.
-RH = Hinge on Right Side
-LH = Hinge on Left Side
Stainless Steel Handle Style:
NOTE: Only present if trim style
is Stainless Steel.
/TH = Tubular Handle
/PH = Pro Style Handle
/CH = Curved Handle