Mtqg Connector Assembly; Specifications - Shure TwinPlex TH53-MTQC User Manual

MTQG Connector Assembly

Note: Make sure to solder the shield to ground collar.

Specifications

All specification values are based on using a typical bodypack with 5 V bias input or the RPM400MTQG preamplifier. When using the RPM400LEMO
amplifier, refer to the RPM400LEMO specifications.
Microphone Capsule
Dual-Diaphragm, Prepolarized Condenser
Polar Pattern
Omnidirectional
Frequency Response
20 Hz to 20 kHz
Sensitivity
-45.0 dBV(5.62 mV)at 1 kHz
Exploded View
Assembled View
[1]
[2]
Shure Incorporated
14/17