Converting Lemo To Ta4F; Ta5F Wiring For Lectrosonics Bodypacks (Servo Biased Wiring) - Shure TwinPlex TH53-MTQC User Manual

Converting LEMO to TA4F

Cable
Electri­
Con­
Series cal De­
struc­
sign
tion
1.6mm
cable
with 2
con­ 2-Wire
TH53- duc­ (Com­
LEMO tors, 2 mon
shield Source)
wires
and
shield

TA5F Wiring for Lectrosonics Bodypacks (Servo Biased Wiring)

Cable
Electri­
Con­
Series cal De­
struc­
sign
tion
1.6mm
cable
with 2
con­ 3-Wire
TH53- duc­ (Source
MTQG tors, 2 Follow­
shield er)
wires
and
shield
1.6mm
cable
with 2
TH53- con­ 2-Wire
LEMO, duc­ (Com­
TH53- tors, 2 mon
NC shield Source)
wires
and
shield
Re­
place­
Polari­ For Use
ment
ty With
Con­
nector
Nega­
tive
Shure
with
TQG/ Termination
re­
TA4F: Dependent
spect
WA430
to
ground
Re­
place­
Polari­ For Use
ment
ty With
Con­
nector
Posi­
tive
with Lectrosonics
re­ WA435 TA5F body­
spect packs
to
ground
Nega­
tive
with Lectrosonics
re­ WA435 TA5F body­
spect packs
to
ground
Wiring Line Art (From Solder Side)
Shield wire: Ground(1)
Red wire: Audio/
Bias(3)
Blue wire: Not con­
nected
8.25kΩ Resistor be­
tween pin 2 and 3
Shield: Ground(Shell)
Wiring Line Art (From Solder Side)
Red wire: Bias(3)
Blue wire: Audio(5)
Shield wire: Ground(1)
Shield: Ground(Shell)
Jumper between 2 and
4
Red wire: Audio/
Bias(3)
Blue wire: Not con­
nected
Shield wire: Ground(1)
Shield: Ground(Shell)
Jumper between 2 and
4
Shure Incorporated
12/17