Related Manuals for Sollae Systems PBH-154
Summary of Contents for Sollae Systems PBH-154
- Page 1 Serial↔LAN / WLAN Converter PBH-154 User Manual Version 1.0 Sollae Systems Co., Ltd. http://www.ezTCP.com...
- Page 2 PBH-154 User Manual Ver. 1.0 This symbol, found on your product or on its packaging, indicates that this product should not be treated as household waste when you wish to dispose of it. Instead, it should be handed over to an applicable collection point for the recycling of electrical and electronic equipment.
-
Page 3: Table Of Contents
2.2.5 Authentication and Security ......................- 22 - WEB configuration ......................- 23 - 3.1 Connecting to PBH-154 ..........................- 23 - 3.1.1 Setting by Wireless LAN ........................- 23 - 3.1.2 Setting by wired LAN .......................... - 24 - 3.2 WEB Configuration ............................ - Page 4 PBH-154 User Manual Ver. 1.0 3.2.2 Connecting to WEB server ........................ - 25 - 3.2.3 WEB configuration page ........................- 26 - 3.3 Available settings ............................- 27 - 3.3.1 Default values ............................- 27 - 3.3.2 Network ..............................- 28 - 3.3.3 Wireless LAN ............................
- Page 5 PBH-154 User Manual Ver. 1.0 Technical Support and Warranty ..................- 47 - 9.1 Technical Support ............................- 47 - 9.2 Warranty ................................- 47 - 9.2.1 Refund ................................. - 47 - 9.2.2 Free Repair Services ..........................- 47 - 9.2.3 Charged Repair Services........................
-
Page 6: Overview
RS232/RS422/RS485 and a frame delimiter for packet fragmentation. PBH-154 comes preloaded with Soft AP so it can simply be linked to any devices with WLAN by operating as an AP. It eases network construction with mobile devices such as smartphones, tablet PCs and laptops where an AP is unavailable. -
Page 7: Application Examples
PBH-154 User Manual Ver. 1.0 Application Examples 1.3.1 Wired LAN 1:1 Connection with a PC Figure 1-1 1:1 connection with a PC Multiple serial ports Figure 1-2 multiple serial ports - 6 - http://www.ezTCP.com... - Page 8 PBH-154 User Manual Ver. 1.0 Applied to LAN Figure 1-3 applied to LAN Applied to the Internet with an IP Share Router Figure 1-4 applied to the Internet with an IP share router - 7 - http://www.ezTCP.com...
-
Page 9: Wireless Lan
PBH-154 User Manual Ver. 1.0 Applied to a serial tunneling system Figure 1-5 applied to a serial tunneling system 1.3.2 Wireless LAN 1:1 network with a PC Figure 1-6 1:1 network with a PC 1:1 network with a PC through an AP... -
Page 10: Components
PBH-154 User Manual Ver. 1.0 Internet connection with a xDSL/cable modem Figure 1-8 Internet connection with an xDSL/cable modem Components PBH-154’s body DVD, including utilities and documents (optional) USB WLAN adapter (optional) DC 5V power adapter (optional) ... -
Page 11: Specification
PBH-154 User Manual Ver. 1.0 Specification 1.5.1 Hardware Input Voltage DC 5V (±0.5V) / USB Power Current Typically 235mA (without a USB WLAN adapter) Dimension 180㎜ x 90㎜ x 24㎜ Weight About 417g (without a USB WLAN adapter) 4 x RS232/422/485... -
Page 12: Dimensions
PBH-154 User Manual Ver. 1.0 Dimensions Figure 1-9 dimensions Dimensions may vary according to a method of measurement. - 11 - http://www.ezTCP.com... -
Page 13: Interface
PBH-154 User Manual Ver. 1.0 Interface 1.7.1 Panel Layout Figure 1-10 panel layout ① LED: PWR, STS, TX, RX ② Ethernet port: 10/100M ③ USB Host port: USB Wireless LAN adaptor connection ④ USB Device port (Setup): For connecting to PHPoC Writer ⑤... -
Page 14: Led
USB Device Port for connection with a PC USB device port is for connection with a PC. You can access to PBH-154 via PHPoC Writer after connecting a USB cable to this port. If USB cable is connected to PBH-154, data communication is disabled because it goes into the firmware download mode. -
Page 15: Supplying Power
1.7.6 USB Host Port for Connection with WLAN adapter PBH-154 provides a USB host port for a USB WLAN adapter. You can connect PBH-154 to Wireless LAN by connecting the WLAN adapter to this port. Note that you cannot use Ethernet (Wired LAN) while using this port. -
Page 16: Serial Interface
PBH-154 User Manual Ver. 1.0 1.7.7 Serial interface PBH-154 provides four serial ports interfaced with D-SUB 9 pin male connectors and you can select the type among RS232, RS422 or RS485. Figure 1-12 D-SUB 9 pin male connector Pin Assignment in RS232... - Page 17 PBH-154 User Manual Ver. 1.0 Pin Assignment in RS422 Number Name Description level type Etc. TX + Transmit Data + RS422 required TX - Transmit Data - RS422 required RX + Receive Data + RS422 required RX - Receive Data -...
-
Page 18: Ethernet
PBH-154 User Manual Ver. 1.0 1.7.8 Ethernet interface PBH-154 has an Ethernet port which supports 10/100M bit Ethernet. Both direct and cross over cable can be used because it automatically detects the type of cable. Figure 1-13 Ethernet connector interface (RJ45) ... -
Page 19: Operation Mode
Operation Mode Wired LAN Mode PBH-154 operates in LAN mode when you connect a LAN cable. To use this mode, you are required to either remove a USB wireless LAN adapter or set WLAN disabled. Figure 2-1 1:1 network with a PC Wireless LAN Mode If the USB WLAN adapter is connected, PBH-154 operates in WLAN mode. -
Page 20: Infrastructure
PBH-154 User Manual Ver. 1.0 2.2.1 Infrastructure In this mode, every wireless LAN station communicates through an Access Point (AP), which is able to interface with both Wireless LAN and Ethernet, so that all stations can be connected to Ethernet. -
Page 21: Ad-Hoc
PBH-154 User Manual Ver. 1.0 2.2.2 Ad-hoc This is an easy way to set up network since wireless LAN stations communicate each other without an AP in this mode. It is suitable for a small scale network if wired LAN is not available. -
Page 22: Soft Ap
Ad- hoc function. PBH-154 supports Soft AP function. While operating in this function, it has 192.168.0.1 as its IP address and assigns one of 192.168.X.X IP addresses to each client. (A simple DHCP... -
Page 23: Key Terms
SSID to communicate in the network. In the case of infrastructure mode, you have to set the same SSID of an AP to PBH-154. Otherwise, it will not communicate at all. The maximum length of this parameter is 31 bytes and the default is “sollae”. -
Page 24: Web Configuration
154’s Soft AP function. The SSID is “phpoc_MAC Address’s last 6 digit”. (e.g. phpoc_000001) Figure 3-1 connecting Wireless LAN using Soft AP ⑤ Checking IP address. After connection, PBH-154 has 192.168.0.1 as its IP address and assigns one of 192.168.X.X IP addresses to each client. - 23 - http://www.ezTCP.com... -
Page 25: Setting By Wired Lan
Connect PBH-154 to your PC via a LAN cable. ② USB Connection Connect PBH-154 to your PC via a USB cable. Device driver will be automatically installed when you connect PBH-154 to your PC. When automatic installation fails, download and install the driver on ST Micro's web site. -
Page 26: Web Configuration
Figure 3-3 WEB configuration 3.2.2 Connecting to WEB server Input the IP address of PBH-154 on the address bar. If you use button setup mode, please connect to 192.168.0.1. Figure 3-4 mobile web browser (Wireless LAN) Figure 3-5 a PC web browser (Wired LAN) - 25 - http://www.ezTCP.com... -
Page 27: Web Configuration Page
PBH-154 User Manual Ver. 1.0 3.2.3 WEB configuration page Figure 3-6 WEB configuration page - 26 - http://www.ezTCP.com... -
Page 28: Available Settings
PBH-154 User Manual Ver. 1.0 Available settings 3.3.1 Default values Name Default values DHCP Network Local IP Address (Assigned IP address check required) WLAN Disable Topology Infrastructure Wireless LAN SSID sollae Security None Serial Type RS232 Baud Rate 115,200bps Parity... -
Page 29: Network
You can choose either Static IP address or Dynamic IP (DHCP) address to assign PBH- 154’s IP address. IP address444444444444 This is a text box to set a static IP address of PBH-154. If you want to use DHCP, IP address will be assigned automatically. Subnet mask When you select Static IP address option, a Subnet mask should be set in this text box. -
Page 30: Wireless Lan
4 channels between each of the networks. This helps to avoid the interference. SSID(Service Set Identifier) SSID is for identification of wireless networks. SSID of PBH-154 should match with AP’s SSID, because wireless devices need the same SSID for communication. The default value is “sollae”. - Page 31 Shared-Key. The first one consists 2 frames: request and response. Because there is no checking process, the shared key is not needed in this mode. The second one uses shared key for the authentication. WLAN Authentication supported by PBH-154 and usable authentication for each topology are as follows. Type...
-
Page 32: Serial / Communication
Serial / Communication Figure 3-9 serial/communication parameter Serial type You can select a type of serial communications in this combo box. PBH-154 has RS232, RS422 (Full duplex) and RS485 (Half duplex) interface. Baud rate Select a baud rate (2,400~230,400bps) for serial data communication. The unit is bit/sec. - Page 33 This box is for setting an IP address of server which is going to be connected with PBH-154. This could be set under a client mode. Server port When PBH-154 is in Client mode, the server’s local port which is listening should be configured at this box. Listen port This item is a port number which will wait to listen in case of a server mode.
-
Page 34: Communication Mode
Table 4-1 comparison of communication mode TCP Server In this mode, PBH-154 listens to receive a TCP connection request from remote hosts. After receiving the request, and the connection is established, PBH-154 converts the raw data from the serial port to TCP/IP data and sends it to the network and vice versa. -
Page 35: Examples
PBH-154 User Manual Ver. 1.0 4.2.2 Examples Figure 4-1 time chart Time States PBH-154 listens to connection requests Remote host sends a connection request (SYN) segment ① Processes of the connection ② The connection is established Data communication is implemented on both sides Table 4-2 states of each point Notice the blue arrow above that the data “123”... -
Page 36: Tcp Client
In this mode, PBH-154 sends request segments to a TCP server with information of [Server IP Address] and [Server Port]. Once a host is listening, the connection will be established. After then, PBH-154 converts the raw data from the serial port to TCP/IP data, and sends them to the network and vice versa. -
Page 37: System Management
5.1.1 Firmware Firmware is a type of software to operate PBH-154. If there are in need of adding functions or fixing bugs, the firmware can be modified and released. For this reason, we recommend using the latest version of the firmware. -
Page 38: Additional Functions
PBH-154 User Manual Ver. 1.0 Additional Functions 6.1 Setting Password A password can be used to protect PBH-154 from changing environmental parameters by non-qualified hosts. The maximum length is 8 bytes of alphabet or number. Figure 6-1 password setting If a password for PBH-154 is set, the following window will be shown. -
Page 39: Wireless Lan Authentication
PBH-154 User Manual Ver. 1.0 Wireless LAN Authentication 6.2.1 Using WEP Usable WLAN topology Ad-hoc, Infrastructure and Soft AP AP settings Set parameters such as authentication mode (open / shared) and key length (64 / 128) on your AP. If you do not know how to set the parameters, refer to its manual or ask the manufacturer. -
Page 40: Using Wpa-Psk
Set WPA-Enterprise for authentication and radius server to communicate. If you do not know how to set AP’s parameters, refer to your AP manual or ask its manufacturer. PBH-154 supports EAP-TLS / TTLS and PEAP. Configuration of the product Click configuration button ( ) and select WLAN tab. - Page 41 PBH-154 User Manual Ver. 1.0 How to use EAP-TLS In the case of EAP-TLS, a certificate is needed to save by PHPoC Writer. The procedures are as follows: ① Configure the ID of radius server account ② Click [Certificate] button Figure 6-4 certificate button ③...
-
Page 42: Advanced Settings
PBH-154 User Manual Ver. 1.0 6.2.4 Advanced Settings You can configure advanced settings for WLAN. We recommend using the default values if you do not have any problem with it. Figure 6-6 advanced Settings PHY Mode You have three options for PHY mode: [802.11], [802.11b] and [802.11b/g]. -
Page 43: Frame Delimiter
PBH-154 User Manual Ver. 1.0 Frame delimiter Frame delimiter is a value that is used when PBH-154 separates TCP segments before sending them to network. Because TCP is a reliable stream transport service, in fact, it is not important how the segments are divided. However, some application needs the separation. -
Page 44: Factory Reset
PBH-154 User Manual Ver. 1.0 Factory Reset It is a function to physically initialize all the setting. 6.4.1 Factory reset procedure Status of Step Procedure Status of PBH-154 STS LED Press the Function button shortly Enter to button setup (less than 1sec.) -
Page 45: Checklist In Trouble
PBH-154 User Manual Ver. 1.0 Checklist in Trouble When you have problem with PBH-154, make sure all the followings first. 7.1 Connection Problem over TCP/IP Connection with the network Check if PBH-154 is successfully connected in network. LED status... -
Page 46: 7.2 Data Communication Problem On The Serial Port
PBH-154 User Manual Ver. 1.0 Checking parameters related with TCP/IP When PBH-154 has a private IP address, an IP address of a PC and PBH-154 need to be on the same network. Check if the IP address and local port number are correct. -
Page 47: Related Materials
PBH-154 User Manual Ver. 1.0 Related Materials Documents You can find each document on our web site or included DVD in your package. Datasheet CE certificate Declaration of RoHS Compliance - 46 - http://www.ezTCP.com... -
Page 48: Technical Support And Warranty
Technical Support and Warranty Technical Support If you have any question regarding operation of the product, visit Customer Support FAQ corner and the message board on Sollae Systems’ web site or send us an email at the following address: E-mail: support@eztcp.com... -
Page 49: 10 Precaution And Exemption From Liability
Do not use the product for a purpose that requires exceptional quality and reliability relating to user’s injuries or accidents – aerospace, aviation, health care, nuclear power, transportation, and safety purposes. Sollae Systems is not responsible for any accident or damage occurring while using the product. - 48 -... -
Page 50: 10.2 Exemption From Liability
Sollae Systems Co., Ltd. and its distributors entire liability and your exclusive remedy shall be Sollae Systems Co., Ltd. and its distributors option for the return of the price paid for, or repair, or replacement of the PBH-154. -
Page 51: French Version
à caractère commercial ou de toute autre perte financière) provenant de l'utilisation ou de l'incapacité à pouvoir utiliser le boîtier PBH-154, même si Sollae Systems Co., Ltd. ou un de ses distributeurs a été informé de la possibilité de tels dommages. - Page 52 PBH-154 sans que la responsabilité de Sollae Systems Co., Ltd. et de ses distributeurs ne puissent être mise en cause, ni que le boîtier PBH-154 puisse être échangé au titre de la garantie.
-
Page 53: 11 Revision History
PBH-154 User Manual Ver. 1.0 11 Revision History Date Version Description Author 2014.08.14 ○ Initial release Amy Kim - 52 - http://www.ezTCP.com...
Need help?
Do you have a question about the PBH-154 and is the answer not in the manual?
Questions and answers