Honda BF4A Operation And Maintenance Ma page 75

DRAIN BOLT
2. Remove the engine oil drain bolt
and sealing washer, and drain the
engine oil.
Install a new sealing washer and drain
bolt, and tighten bolt securely.
OIL DRAIN BOLT TORQUE:
33 N·m (3.4 kgf·m , 24 lbf·ft)
3. Refill to the upper level mark on
the dipstick with the recommended
oil. Insert the dipstick screwing it
in, then remove it and check the oil
level shown on the dipstick.
MAINTENANCE
UPPER LEVEL 0.55 L
(0.58 US qt, 0.48 Imp qt)
LOWER LEVEL 0.45 L
(0.48 US qt, 0.40 Imp qt)
4. Reinstall the oil filler cap securely.
5. Install the engine cover and lock it
securely by push down the engine
cover latch (see page 31).
Please dispose of used outboard
motor oil in a manner that is
compatible with the environment. We
suggest you take it in a sealed
container to your local service station
for reclamation. Do not throw it in the
trash or pour it on the ground.
DIPSTICK
75