Honda BF4A Operation And Maintenance Ma page 49

6 mm FLANGE
BOLTS AND
WASHERS
RECOIL
CASE
6. Remove the two 6 mm cap nuts,
two washers, two 6 mm flange
bolts and two washers. Remove the
recoil case.
Take care not to lose the bolts, nuts
and washers.
THOROTTLE CABLES
6 mm FLANGE BOLT
(Tighten by hand)
7. Install and tighten the 6 mm flange
6 mm CAP
bolts by hand.
NUTS AND
WASHERS
8. Hook the throttle cables to the
cable hook.
STARTING THE ENGINE
NEUTRAL START CABLE
CABLE HOOK
9. Hook the neutral start cable to the
under case.
6 mm FLANGE BOLT
(Tighten by hand)
49