Loading, you need to load the"spectrum_file_001.txt"in your USB, and then you can see the previously saved spectrum
data.
Press the F1 button to keep the spectrum, and press the F2 button to analyze spectrum, and press the F3 button to mark
spectrum, and press F4 button to next page.
In the next page, you can press the F1 button to change Polarization control Hor / Ver, press F2 button to switch 22KHz signal
on or off, and Press the F3 button to switch DiSEqC , and press F4 button to previous page .
4.3 Terrestrial
Main Menu->Terrestrial
Press OKbuttontoenter the Terrestrial menu.
8