Openbox TSC-200 HEVC User Manual page 2

Preface
Please read this manual carefully before using your Digital Sat meterfor the first time.
This operating manual will help you in the
•Appropriate,
•Safe
•Favorable
The technical specifications and operating methods included in this manual are subject to changes without notice. In case of
any inquires after a period of usage, please contact the manufacturer.
Safety Precaution
Please read the safety instructions carefully before operating the device.
Please follow all warnings and instructions on the equipment and in the operating manual.
Safety of persons
Ensure that nobody can be hurt by falling tools or parts of the sateantenna during the adjustment and installation of the
antenna. For own security, use a rope on sloping roofs.
Attention for adapter
The devise should only be operated with the supplied AC adapter at the mains. Do not open the meter or the included AC
adapter. There is danger of life through electric shock! Wrong usage of the ports can lead to the destruction of the
measuring device.
Proceed carefully with the measuringdevice:
• Avoid low temperatures (below 0 °C) or to high humidity.
• The TFT display can be damaged by mechanical impacts.
• Avoid excessive input voltages. Please refer to the technical data
Do not operate with thedevice:
• If it has visible damage,
• If there are loose parts in the device,
• If the device was located outdoors or in damp rooms aextended period of time.
Main Supply:
.
Before operating, please check the units operating voltage is 90~240V AC 50/60Hz
Overload:
Do not overload a wall outlet, extension cord or adapter, neither use damaged power cord or touch it with wet hand as this
may result in electric shock.
Liquid:
The receiver shall not be exposed to dripping or splashing water, and that noobjects filled withliquids, such as base, shall be
placed on the apparatus.

Ventilation:
Keep the slots on top of the receiver uncover to allow sufficientairflow to theunit. Do not put the receiver on soft furnishings
or carpets.Do not expose there receiver to direct light or do not place it near a heater or in humid conditions.Do not stack
other electronic equipments on top of the receiver.
Cleaning:
Plug out the receiver from the wall outlet before cleaning. Clean the receiverby a soft cloth or mild solution of washing-up
liquid (no solvents).
Location:
Put the receiver indoor in order to avoid lightening, raining or sunlight.
Uncover:
Do not remove the cover, to reduce the risk of electric shock.Contact qualified and licensed service personnel to repair the
receiver, or contact your dealer.
1