Table of Contents
Advertisement
4.2.1 TP Search
Main Menu-> satellite->TP Search
Highlight the TP Search and press the OK button to enter Select Satellite. In this menu, you can execute select, Add, Delete,
Rename, and Move to satellite.
4.2.2 Satellite IDE.
Main Menu-> satellite->Satellite IDE.
Select satellite and press the ok button to enter TP
Search. This menu allows you to configure the
antenna setting parameters. You can select satellite,
transponder, LNB TYPE, LNB, Power, 22 KHz,
DiSEqC1.0, DiSEqC1.1.
-Delete:If you highlight the Satellite, pressF1 button
to delete satellite. If you highlight the Transponder,
pressF1 button to delete transponder.
-Start Search:After configure the antenna setting,
press the F2 button to TP search.
-Constellate: Press the F3 button to display
constellation.
-Explorer:Press the F4 button to explorerthe signal
information.
-Satellite: Press the ◄/► to select satellite or press
the ok button to enter satellite list, then select
satellite. When you highlight the satellite and press
ok button, you also can execute Delete, Add, and
Move to and Renamesatellite.
-Transponder:Press the ◄/► to select transponder
or press the ok button to enter transponder list, then
select transponder. When you highlight the
transponder and press ok button, you also can
execute Delete, Add, Delete, and
Edittransponderand Edit PID.
Note:If you change the satellite, the transponder will
be changed automatically.
6
Advertisement
Table of Contents
