Table of Contents
Advertisement
In this menu, you can know the exact information about the transponder which you selected. You also can execute Delete
and Add transponder, Manual Search and Network Search.
4.4.3 Packet Control
Main Menu->CATV ->Packet Control
In this menu, you can know the strength and quality of each transponder.
4.4.4 Spectrum
Main Menu->CATV ->Spectrum
In this menu, you can know the strength of all transponders.
-Hold: Press the F1 button to keep the spectrum.
-◄/►:Change the transponder
-▲/▼: Change the range of the Y-axis.
-F3 (Mark/conf): Set the center TP, the transponder of span and the range of the Y-axis.
4.5 Watch TV
Main Menu->Watch TV
In this menu, you can watch TV and edit channels.
-MER:Modulation error rate.
-Pre BER: Forward error correction.
-Post BER: Afterward error correction.
-Power: It will show you the strength of the transponder
what you selected.
-Modulate: Modulation efficiency.
Note: After insert USB, you can press OK button to save
or load the data of spectrum. If you select saving the
data, you can press OK button or exit button to close the
save. Thenyou can find "spectrum_file_001.txt "in your
USB. If you select Loading, you need to load
the"spectrum_file_001.txt"in your USB, and then you
can see the previously saved spectrum data.
11
Advertisement
Table of Contents
