Clear Memory; Viewer Software - Fluke 810 Getting Started

Clear Memory

Select the Clear Memory option on the Instrument Setup
screen to erase all measurement and diagnosis data. A
sequence of confirmation messages display:
If you select Yes, another confirmation message displays:
Select Yes to clear the memory. This action erases all
stored measurement and diagnosis data.

Viewer Software

The 810 Vibration Tester includes Viewer software that
lets you do tasks from a computer. With the basic
features of the software you can:
download a Machine Setup from the Tester
•
set up a new machine
•
make a copy of a Machine Setup
•
change a Machine Setup
•
look at cited peaks graphs, vibration spectra, and
•
time waveforms
gbk31.bmp
zoom-in and zoom-out of data views
•
make a backup of the diagnosis data from a
•
measured machine
import and look at the thermographic image of a
•
machine
Additionally, you can configure the Machine Setups with
the software and upload them to the Tester. This Machine
Setup procedure is much the same as the Machine Setup
wizard in the Tester. For external analysis of the fault
gbk32.bmp
data, you can export the Machine Setup, diagnosis data,
and fault data to a PDF to send to a vibration test
consultant.
Vibration Tester
Viewer Software
19