H3C S3100-52P Operation Manual page 22

Operation Manual – AAA – RADIUS – HWTACACS
H3C S3100-52P Ethernet Switch
Authorize the user to
access specified type(s)
of service
Set the privilege level of
the user
Set the attributes of the
user whose service type
is lan-access
Operation
service-type
lan-access | { telnet |
ssh | terminal }* [ level
level ] }
level level
attribute { ip ip-address |
mac
idle-cut
access-limit
max-user-number | vlan
vlan-id | location { nas-ip
ip-address
port-number
port-number } }*
Chapter 1 AAA & RADIUS & HWTACACS
Command
{ ftp |
mac-address |
second |
port
| port
1-20
Configuration
Description
Required
By default, the system
does not authorize the
user to access
service.
Optional
By default, the privilege
level of the user is 0.
Optional
When binding the user to
a remote port, you must
use nas-ip ip-address to
specify a remote access
server IP address (here,
ip-address is 127.0.0.1 by
default, representing this
device). When binding the
user to a local port, you
need not use nas-ip
ip-address.
any