H3C S3100-52P Operation Manual page 18

Operation Manual – AAA – RADIUS – HWTACACS
H3C S3100-52P Ethernet Switch
Caution:
You can execute the scheme radius-scheme radius-scheme-name command to
adopt an already configured RADIUS scheme to implement all the three AAA
functions. If you adopt the local scheme, only the authentication and authorization
functions are implemented, the accounting function cannot be implemented.
If you execute the scheme radius-scheme radius-scheme-name local command,
the local scheme is used as the secondary scheme in case no RADIUS server is
available. That is, if the communication between the switch and a RADIUS server is
normal, no local authentication is performed; otherwise, local authentication is
performed.
If you execute the scheme hwtacacs-scheme hwtacacs-scheme-name local
command, the local scheme is used as the secondary scheme in case no TACACS
server is available. That is, if the communication between the switch and a TACACS
server is normal, no local authentication is performed; otherwise, local
authentication is performed.
If you execute the scheme local or scheme none command to adopt local or none
as the primary scheme, the local authentication is performed or no authentication is
performed. In this case you cannot specify any RADIUS scheme at the same time.
II. Configuring separate AAA schemes
You can use the authentication, authorization, and accounting commands to
specify a scheme for each of the three AAA functions (authentication, authorization and
accounting) respectively. The following gives the implementations of this separate way
for the services supported by AAA.
For terminal users
Authentication: RADIUS, local, HWTACACS or none.
Authorization: none or HWTACACS.
Accounting: RADIUS, HWTACACS or none.
You can use an arbitrary combination of the above implementations for your AAA
scheme configuration.
For FTP users
Only authentication is supported for FTP users.
Authentication: RADIUS, local, or RADIUS-local.
Perform the following configuration in ISP domain view.
Chapter 1 AAA & RADIUS & HWTACACS
1-16
Configuration