H3C S3100-52P Operation Manual page 16

Operation Manual – AAA – RADIUS – HWTACACS
H3C S3100-52P Ethernet Switch
Set the maximum number
of access users that can
be contained in the ISP
domain
Set the
function
Set
accounting-optional
switch
Set
function
Set the self-service server
location function
Caution:
On an S3100-52P Ethernet Switch, each access user belongs to an ISP domain.
You can configure up to 16 ISP domains on the switch. When a user logs in, if no
ISP domain name is carried in the user name, the switch assumes that the user
belongs to the default ISP domain.
If the system does not find any available accounting server or fails to communicate
with any accounting server when it performs accounting for a user, it will not
disconnect the user as long as the accounting optional command has been
executed, though it cannot perform accounting for the user in this case.
The self-service server location function needs the cooperation of a
self-service-supported RADIUS server (such as CAMS, that is, comprehensive
access management server). Through self-service, users can manage and control
their account or card numbers by themselves. A server installed with the self-service
software is called a self-service server.
Operation
access-limit { disable |
enable
max-user-number }
user idle-cut idle-cut
enable minute flow }
the
accounting optional
messenger
the messenger
{ enable limit interval |
disable }
self-service-url { disable
| enable url-string }
Chapter 1 AAA & RADIUS & HWTACACS
Command
{ disable |
time
1-14
Configuration
Description
Optional
By default, there is no limit
on the number of access
users that can
contained in an
domain.
Optional
By default, the
idle-cut function
disabled.
Optional
By default,
accounting-optional
switch is closed.
Optional
By default, the messenger
function is disabled.
Optional
By default,
self-service server
location function
disabled.
be
ISP
user
is
the
the
is