NorthStar HORIZON Installation Manual page 9

I N'mODUCTIOH
(cont. )
Parts
Generic
Parts for
Hard Disk
Drive Kits
Additional
Parts for
00-30
Hard
Disk Drive
Upgrades
2
The parts shown below, except for miscellaneous
hardware such as screws and washers, are special
items designed for use with your computer. We
recommend that you do not sUbstitute parts unless
you receive confirmation of their acceptability
from a North Star dealer or dealer's
representative.
The following parts are supplied for all HORIZON
hard disk drive kits.
o Hard disk drive
o Hard disk power supply assembly
o Hard disk drive support bracket
o Hard disk power supply cable
o A 20-conductor pre-folded ribbon cable
o A 34-conductor pre-folded ribbon cable
o Disk drive brace
o Hard Disk Information label
o Plastic cable tie wrap
o Two '4-40 x 3/8
ft
screws
o Two '4 split lockwashers
o Two #4 flat washers
o Three #10 male terminals
o Three #10-32 x 3/8" slotted screws
o Four #6-32 x 1/4
ft
screws
o Four 16 flat washers
The following additional parts are supplied for
installation of the HD-30 hard disk drive in the
HORIZON computer.
o Rear panel"
o Side" baffle
o Two side baffle end retainers
o Inner baffle
o Inner baffle holder
o Transformer/diode assembly
o Four flat washers
o Four split lock washers
o Four screws
o Cable tie hold-down
o Cable tie wrap
o FCC label
HORIZON Hard Disk Installation Guide